I went with the Ring Pro over the Original Ring because I was going to be wiring it in place anyway. I also like the slender profile and the possibility to use wireless 5.0 in the future if I desire. Plus I live on a very busy road and wanted the advanced motion detection zones on the pro. Since I did my research, I was aware that the Ring Pro has a 160 degree field of view compared to the 180 degree view of the original. For this reason, I purchased fiberglass shims to angle it more towards my large 6 foot doors when I installed it.
Watch over your home from your phone, tablet or PC with the all-new Ring Video Doorbell 2. The latest version of Ring’s iconic Video Doorbell features an innovative design packed with advanced security features. With 1080HD video, two interchangeable faceplates and a quick-release rechargeable battery pack, the new Ring Video Doorbell 2 makes monitoring your home even easier than before. Get instant alerts when people press your Doorbell or trigger the built-in motion sensors, and see, hear and speak to visitors from your phone, tablet or PC.
Setting up a smart security system requires you to consider the size of the space you want to protect, the tech capabilities that are most important to you, as well as the tech stack you want to use. Ring’s products are all Alexa-enabled, meaning they can be easily integrated into your existing smart home set-up. Plus, the company offers Protect Plus 24/7 Professional Monitoring for $10 per month. (Compare this to Nest’s similar service, which will ding you $19-29 over the same period.)
The Ring Doorbell Camera security system was acquired by Amazon. They currently offer doorbell cameras and exterior security lighting cameras. And according to their website product page, Ring will soon be adding indoor security and environmental protection products to their lineup as well. This is great news based on how popular their current products have become.
Now, on paper, this doesn’t sound like a frustrating process. And in best-case scenarios, the app would load as quickly as what you see in my video at the top of this article. But oftentimes these ostensibly brief steps would take forever. Sometimes my phone would be in another room. Sometimes I couldn’t quickly get it out of my pocket, or I’d fumble with my unlock code. But worst of all, sometimes the video chat screen would take an eternity to load.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
You can also disarm the system from the app, but in a break from convention, Ring does not offer a key fob for arming and disarming the system. Geofencing that would automatically arm and disarm when you leave and return isn’t supported either. Harris said those were conscious design decisions. “What it came to was security,” Harris said. People said ‘Hey, I want this to automatically disarm my security system when I get close.’ The question then becomes: How close? And is it really you with your phone? Or did someone pick it up at the park, find your address, drive to your house, and let themselves in?”
The Ring Alarm system has three different modes, which can be set via the keypad or through the iOS and Android apps. There’s the standard disarmed mode that turns off all of the monitoring; an away mode that watches all of the installed sensors for intrusions; and then a “Home” mode, which by default will monitor sensors installed on entryways, but ignores motion inside the house. I’ve used the latter mode as basically a night or sleep setting, since during the day my family moves in and out of the house a lot and would constantly trip the door sensors.
This bundle is a pretty comprehensive home security system, but the one thing it doesn't include is a camera. You can add Ring Video Doorbell or Ring Spotlight Cam to it, and both will integrate seamlessly with the pieces in this kit. The motion sensors in Ring's cameras will trigger the alarm in the base station, while also giving you video evidence in case of a break-in.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
I feel like this was a great purchase. The price is excellent. I love being able to access it anytime from my phone. I love knowing what is going on at my house even when I’m on vacation. I love the security aspect both in surveillance and as a deterrent. It looks sharp (see photo). It’s also a lot of fun. I’ve shown it off to many friends and coworkers, at least one of which decided to get one themselves.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
My connectivity issues notwithstanding, I’ve come to appreciate Ring’s motion alert feature, which sends the sound of a wind chime to your phone when someone approaches your door. Once you hear the chime, you can open a video window to talk with the visitor if you’re so inclined. Alternately, you can just let Ring’s cloud-based recording feature ($3 monthly or $30 annually) pick up the video of your visitor, and watch it later.
Ring’s sensors operate on battery power, the keypad and base station come with AC adapters, and the Z-Wave range extender plugs directly into an AC outlet. All three of those components have battery backup, so the system will continue to operate in the event of a power outage. The base station connects to your home network via hardwired ethernet or Wi-Fi. A Ring Protect subscription activates an LTE module in the base station that will keep the system connected to the internet if your broadband connection goes down. You can even run the keypad on battery power full time if you choose, since most homes don’t have AC outlets right next to doors. An LED will tell you when the battery needs to be charged.
3) Operational Use. I like being able to set up polygons for the motion detection zones. I was able to easily mark my drive way, flowerbeds and porch. I’ve never had a problem with the busy traffic from the road (something the security guy mentioned was a problem with his original Ring). There are two problems they need to work out: You will get a motion detect when the night vision clicks on in the evening and when it clicks off in the morning. Expect that.
The Ring Pro uses the same Android and iOS mobile app as other Ring devices. It opens to a My Devices screen that has a button for each installed Ring device at the top, as well as a Neighborhood button. Like the Floodlight Cam, the Ring Pro offers a Neighborhood feature that lets you share recorded events with neighbors who have downloaded the Ring app and joined the Neighborhood. You'll receive an alert when a neighbor posts a video, as well as for activities such as fire and police action in your neighborhood.
It would have been nice to see more smart-home integration between the Ring Alarm and other well-established third-party names, if only because the company has already set such a precedent for itself in this area. Buying it won't introduce any new tricks to an existing Ring doorbell, either, but if you're already in the ecosystem and you're looking to expand, this $200 starter kit is a sure fit.
The system was quite easy to install. Having six sensors to place seems like a lot, until you realize you can’t cover everything though you can certainly cover enough. I found the system to be very responsive whenever it was armed or a sensor was set off (both the app and e-mail notifications were received mere seconds after an event). This is in marked contrast to a non-Ring security camera I use to monitor the entrance that can take several minutes or longer to send me notifications. The siren too was fairly loud, as I found out one early weekend during testing.
Where Nest Wins: Nest has a better design, fantastic cameras, and cheaper cellular backup. Their multi-purpose sensors may cut down on the number of sensors you need, though they are more expensive than abode and Ring sensors. Also, Nest Guard is the most intuitive with LED lights, a keypad, and voice feedback. Finally, Nest Secure offers a 2-year warranty where abode and Ring offer 1-year warranties. However, there are areas where abode and Ring win too.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
The Ring™ Video Doorbell connects to your home Wi-Fi network and sends real-time notifications to your smart phone or tablet when someone is at your door. Using our free Ring App which is available for Apple, Android, and Windows 10 devices, you can see an HD Video stream of the person at your door and speak to them using two-way audio communication.
Each piece of Ring's kit is designed to protect a different part of your house. The contact sensors detect when windows and doors are opened or closed; the motion detectors use infrared beams to sense movement and heat in a room; the keypad lets you arm and disarm the system; the base station keeps the system online, and has a 110-decibel siren that sounds when motion is detected; and the range extender keeps the sensors connected to the base station. Both the base station and range extender have a 24-hour battery backup that will keep the system online in case of a power outage.
Moving on...If you are installing the hard wired RIng doorbell version (not wireless) just remember to shut off the power to the doorbell prior to installing. I installed the doorbell, downloaded the free application for my wife and I, added the adapters to my current doorbell, and set the "Motion Zone". The entire process took approximately 40 minutes. Having the set "Motion Zones" helps us out a lot so we do not get "Motion Detected" alerts from people on the sidewalk but anything closer to my home it goes off. Everything works flawlessly and the speaker sounds great. Images and video during day and night are clear. No issues hearing the person at my door nor them hearing me. My wife loved it as much as I did and we decided to get a second one for our second door (plus it was a Amazon special we could not pass up!).
So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.