So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.
Never wonder who’s knocking at your door again. With the Ring Doorbell, you’ll receive alerts when your doorbell is pressed or motion is detected, allowing you to hear and interact with visitors. In addition to acting as a two-way communication device for your front door, it works as a security system; you can set motion detection zones from five to 30 feet outside your door. The sensor is quite sensitive, so it’s probably best to set its range and awareness levels as low as you’re comfortable with. If you’re willing to venture off Amazon (and pay a little more), the Nest Hello doorbell is another favorite option that works with Alexa.
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
Unlike the other options, Ring cameras don’t integrate with the security system. Sure you can monitor them all using a single mobile app, but there is no “if this, then that” relationship. If your alarm sounds, your cameras will not record. If your cameras detect motion, they won’t trigger your alarm. However, there is one major benefit to using Ring cameras: If you pay $10 per month, you will gain access to cloud storage and professional monitoring with cellular backup.
I mentioned a cat sitter. It was kind of awesome to be able to see that she came by every day. In fact, the first day she didn’t come by until 11:00pm and I worriedly texted her to see if she was going to come. Every other day I took solace in knowing that she had already stopped by without having to text her or fear her shed forget. I was able to see when the lawn service came by and did their thing. I was able to see when packages were delivered and when my mom brought the nephews up to use the pool. I also got to scare the crap out of our friend as they were leaving our empty house and I wished them goodnight. That was worth some money right there. I even caught a few people using my driveway to turn around.
Ring lacks third-party integrations. The Base Station communicates with Z-Wave and Zigbee, and I’ve confirmed those protocols were added for a reason, but they haven’t taken advantage of them. The system supports the First Alert Z-Wave Smoke/CO detector which is also compatible with the Ring Response service. Soon, it will also work with the Dome Siren. But that’s it. Ring currently lacks an IFTTT channel and even an Alexa integration, which is odd as Ring is owned by Amazon.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
Feel the difference Baldwin hardware is solid throughout Feel the difference Baldwin hardware is solid throughout with a 60 year legacy of superior style and quality. Baldwin is the choice for an elegant and secure presence. Baldwin guarantees the beauty of our finishes and the performance of our craftsmanship for as long as you own your home. More + Product Details Close
Quiet Open allows you to bypass an armed sensor simply by touching it. For example, if your system is armed, but you want to check the weather outside, you can press the sensor, and open your door. While I’ve heard only praise for this feature, my initial reaction was that it seems like a security flaw. Your teenagers, for example, can press the sensor and sneak out. Furthermore, there is no identification tied to using the feature. For example, it won’t say, “Rose bypassed the sensor.” Fortunately, you can turn this feature off if you’re concerned.
When it's time to pair the keypad, the Ring app will have you create a four-digit PIN for arming and disarming the system. If you choose to have professional monitoring, you'll need to also come up with a verbal password to help identify you in case you have to talk to a dispatcher. As a reviewer — and a person who has tripped countless alarms in the last few months — I also appreciate that there's a seven-day trial period before professional monitoring becomes active, so you can take time to set up the system without worrying about false alarms. It also gives you time to register the alarm so that you do not incur any fees.
My connectivity issues notwithstanding, I’ve come to appreciate Ring’s motion alert feature, which sends the sound of a wind chime to your phone when someone approaches your door. Once you hear the chime, you can open a video window to talk with the visitor if you’re so inclined. Alternately, you can just let Ring’s cloud-based recording feature ($3 monthly or $30 annually) pick up the video of your visitor, and watch it later.