The keypad has 12 backlit buttons on the left-hand side and three in a circle on the right. You create a four-digit PIN during setup, which you’ll tap into the keypad when you arm and disarm the system (you can also do this from the Ring app, which is available for Android and iOS devices. It’s the same app used for Ring’s video doorbell and security cameras, although there’s currently little integration between the cameras and the security system.)
Never wonder who’s knocking at your door again. With the Ring Doorbell, you’ll receive alerts when your doorbell is pressed or motion is detected, allowing you to hear and interact with visitors. In addition to acting as a two-way communication device for your front door, it works as a security system; you can set motion detection zones from five to 30 feet outside your door. The sensor is quite sensitive, so it’s probably best to set its range and awareness levels as low as you’re comfortable with. If you’re willing to venture off Amazon (and pay a little more), the Nest Hello doorbell is another favorite option that works with Alexa.
The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.
Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
If it's an entry sensor you're installing, Ring will ask what kind of door it is to apply the right sort of security to it — if it's your front door, for instance, it will use an entry countdown when you open the door while the base station is in Home and armed mode. If it’s the back door that's opened in this mode, the alarm will sound immediately.
1) First Impressions. We have a security system installed but didn’t go with their camera system because it was CCTV and I wanted something with an internet connection or way to access it from my phone. While making small talk with the security system guy, I mentioned the Ring to him. He was super excited to get out his phone and show me that he has one. He said he couldn’t buy any camera with nearly that quality at that price even with his discounts. He spoke so highly of it I was sure that’s what I wanted to get. We want to do a whole system with cameras on the back of the house, but we purchased the Ring Pro to see how we liked it before we commit to buying everything.
The Alarm system does not have as many bells and whistles as Nest’s system, nor does it have some of the conveniences Nest provides. But at $199 for the starter bundle, which includes the necessary hub, a keypad, a motion detector, a contact sensor for doors or windows, and a range extender, plus $10 per month for professional monitoring, Ring’s system is significantly cheaper than Nest Secure (which was just recently reduced to $399 for its starter kit) and is one of the least expensive home security systems you can purchase.
The Hampton Bay Wireless Battery Operated Doorbell Kit The Hampton Bay Wireless Battery Operated Doorbell Kit included 1 chime and 2 wireless push buttons. The Plug-in chime features a traditional Ding-Dong sound for the front entrance and a Ding for your back entrance. All Hampton Bay Wireless Push Buttons Door Bells and Alerts are compatible so you can ... More + Product Details Close
▽ Your account minimum payment amount is determined by the purchases and balances on your WebBank/Fingerhut Credit Account. The change in minimum payment amount is based on your account balance at the time it is advertised, and includes an assumption of interest charges and SafeLine fees, as applicable. The change in minimum payment amount does not include subsequent activity on your account such as any purchases, including deferred payment purchases, backordered, unshipped, returned or other pending purchases or exchanges; any payments, including partial, missed or returned payments; any fees, including recurring partner program charges, subsequent interest charges, late fees or returned payment fees. It is also subject to change based on shipping address, shipping method, partial shipments and taxes. Your minimum payment amount will not change and the purchase will not reflect on your statement until the order ships. If you have a balance or are making a multiple item purchase, see the Existing Balance Payment Chart.
I don’t think I mentioned the answer in this article, but I know I’ve talked about this elsewhere. Unfortunately, all I can remember is abode and Ring. I can’t remember anything about Nest. All abode devices and sensors use the abode RF encrypted protocol to talk to the gateway. They also encrypt all communication between the gateway and the cloud. Ring uses Z-Wave Security 2 and Z-Wave SmartStart technology which encrypts the signal between the base and cloud as well as the base and sensors.
I blame spotty home Wi-Fi for this particular performance problem. It’s not necessarily Ring’s fault that my Wi-Fi network is a weak link in its communication chain, but this is a product that relies on home Wi-Fi to work in the first place. The problems I suffered reveal an intrinsic, inescapable weakness in Ring’s workflow, and should remind us that all Internet-connected home appliances are only as strong as the weakest link in their networks.
Ring's $199 Z-Wave-enabled Alarm Security Kit is so simple you might overlook it at first. The system includes a base station, a keypad, a door/window sensor, a motion sensor and a Z-Wave range extender. It's all basic hardware with basic functionality -- you won't find any fancy features here -- but the Security Kit is super simple to set up and monitor in the Ring mobile app.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
The other major part of the Ring Alarm kit is the 5.9 x 3.9 x 0.9-inch keypad, which can also be laid flat or hung on the wall. The keypad has 12 backlit number buttons, as well as three other buttons for quickly arming and disarming the system (though it's also possible to do so from the Ring app for iOS and Android). The buttons are plastic and easy to clean, and by default, they chime when pressed. I like that the keypad is handheld, but I still much prefer the rubberized remote keypad offered by SimpliSafe.
Ring lacks third-party integrations. The Base Station communicates with Z-Wave and Zigbee, and I’ve confirmed those protocols were added for a reason, but they haven’t taken advantage of them. The system supports the First Alert Z-Wave Smoke/CO detector which is also compatible with the Ring Response service. Soon, it will also work with the Dome Siren. But that’s it. Ring currently lacks an IFTTT channel and even an Alexa integration, which is odd as Ring is owned by Amazon.
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.
Despite our internet running at 300mpbs or faster, our Ring struggles to pick up a solid signal from our router, which is no more than 15 feet from the RING. The several times I've contacted the Ring support team they've been very friendly. They even sent us a signal boosting Chime Pro for free to help with the signal problem. Unfortunately this only made the signal worse according to the support team.