We paid Ring $30 for each doorbell yearly fee ($60 for both) which allows Unlimited video storage. You also are able to "Share" the recorded video which allows you to email the videos as you wish. I also found the laptop Ring application. While working on my laptop I can receive notifications, watch the live video, and/or answer all from my laptop.
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
Ring's professional monitoring isthrough Rapid Response Monitoring Services, and it's one of the more affordable services available. For $10 a month (or $100 a year if paid up front), you get the benefits of dispatchers on standby, and this includes video storage for any Ring cameras you might have. There's no long-term contract, either, so you can cancel any time you don't need it through the Ring website.
After I installed the second Ring I noticed I was not able to connect as quickly and sometimes not at all to the doorbell. I watched a few YouTube videos for troubleshooting and BOOM! I found the issue (I can not fault Ring for this). My current doorbell transformer was only max 16V of power. I went and purchased a max 24V transformer and a plug-in WiFi extender (approximately $50 total for both). This solved the issue and we were able to connect to both doorbells with no problems. Since July of 2017, and the upgrades, we have had no issues. We had temperatures as low as -20 degrees Fahrenheit and they were still working.
Since the Security Kit only comes with one detector and one sensor, you’ll likely need to invest in more sensors if you’re looking to cover any space with multiple access points. The advantage of the Ring contact sensors is that they work on both doors and windows, meaning you can easily swap them from one location to another as you configure your set-up. When triggered, the sensors will send instant alerts to your phone, letting you react in real time. While a little bigger than traditional sensors, these come in a bright white color, blending in with most door and window frames.
Great article with lots of useful information. Very comprehensive comparison that really helps people make a wise decision based on their particular needs. FYI, I chose abode for my home security needs because it’s a proven shipping product and it integrates well with other systems. Although the camera quality might not be as good as others, it will suffice for my needs.
I mentioned a cat sitter. It was kind of awesome to be able to see that she came by every day. In fact, the first day she didn’t come by until 11:00pm and I worriedly texted her to see if she was going to come. Every other day I took solace in knowing that she had already stopped by without having to text her or fear her shed forget. I was able to see when the lawn service came by and did their thing. I was able to see when packages were delivered and when my mom brought the nephews up to use the pool. I also got to scare the crap out of our friend as they were leaving our empty house and I wished them goodnight. That was worth some money right there. I even caught a few people using my driveway to turn around.
Nest, Ring, and abode all sell cameras. Nest works with Nest Cams including the indoor and outdoor cameras, Nest IQ both indoor and outdoor, as well as Nest Hello. When Nest Secure detects an alarm event, it will trigger your Nest cameras to take a snapshot. If you have email alerts turned on, the cameras will email you a snapshot of the event. It can also send a push notification to your phone.
Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
The biggest physical difference between the Doorbell 2 and the original is the new, slide-out battery. With the first model, recharging the battery required removing the entire doorbell from the frame and plugging it in for five to six hours. The new, removable battery (which looks like something you might find in a DSLR or camcorder) is much easier to charge: you just remove the front panel of the doorbell (a security screw underneath needs to be removed with the included screwdriver first), slide the battery out, and plug that into a Micro USB cable. Charging still takes five or six hours — it’s a hefty, 6,100mAh battery and this doesn’t have any quick charging features you might find on a smartphone — but the modularity of this design means you can buy a second battery and put that in to keep your doorbell functional while the other charges. Ring provides one battery in the box, but you can buy spares from Ring’s website for a reasonable $20.
The camera's motion sensor worked without a hitch, as did the pre-buffer feature. I always received a push notification, and the camera never failed to record a clip when the sensor was triggered or when the doorbell button was pressed. I created an IFTTT applet to have a D-Link Smart Switch turn on a lamp whenever the doorbell button was pressed, and it worked without fail, as did my Alexa voice command to display the Ring Pro's live stream on my TV using an Amazon Fire TV Stick and Amazon Echo.
That’s convenient for a number of reasons: it’s easier to install a Video Doorbell 2, and it has more options for its placement than one that has to be installed where the wiring is. But don’t be fooled: the Video Doorbell 2 is not the kind of product that can be installed and then easily removed and swapped to a different door or area. This is very much a permanent installation, which means it likely won’t work for renters.
Once your trial of ring video recording ends, you can no longer access past events without a paid subscription. That's not such a big deal until you realize what counts as a "recent event". If you don't press the button within about 5 seconds of getting a motion alert, you missed your shot and now it's a past event. Say the UPS guy comes, presses the doorbell and walks off immediately. Your phone properly notifies you that somebody is at your door, but you've got something in your hands, or your phone is in your pocket or any other distraction is going on that takes 5 seconds to finish. By the time you hit the notification banner and go into the app, it will take you to a screen that says you need a paid subscription to see past events. Earlier today I got a notification WHILE holding my phone, clicked it immediately, but the live video loaded slowly and by the time it did load, the "event" was considered done and it took me to the screen saying I needed to pay. I have no problem paying to record everything and be able to pull up events from hours, days or weeks ago, but needing to pay because 5 seconds went by and the app loaded slowly is a rip-off. This is a $200 item which replaces a $5 hardware store doorbell, and the ONE thing it's supposed to do (show you live video of rings or motion events at your door) doesn't work about half the time without paying extra. There needs to be about a 30 second window at minimum where you can see what's going on without having to pay extra.