The camera's motion sensor worked without a hitch, as did the pre-buffer feature. I always received a push notification, and the camera never failed to record a clip when the sensor was triggered or when the doorbell button was pressed. I created an IFTTT applet to have a D-Link Smart Switch turn on a lamp whenever the doorbell button was pressed, and it worked without fail, as did my Alexa voice command to display the Ring Pro's live stream on my TV using an Amazon Fire TV Stick and Amazon Echo.
Below the Live View button is a series of feature buttons. Event History takes you to the same events list that you'll see in the My Devices screen; Device Health lets you check voltage, Wi-Fi signal strength, and system status; Linked Chimes is where you go to pair the doorbell with an external plug-in Ring Chime ($29) or Chime Pro ($49); and Motion Settings lets you adjust motion sensitivity, set up motion zones, and create a motion schedule that determines when motion alerts are active.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.

Equipment sensor: I have an expensive four-wheeler and zero-turn mower in my backyard, and would like to see some kind of sensor (other than motion, too many plants and wind won’t make it practical) to protect these expensive items as well. This would be a great selling point; maybe like a magnetic plug stuck to a metal part of the bike’s body, that if it’s removed from that metal body it alerts the brain.
I blame spotty home Wi-Fi for this particular performance problem. It’s not necessarily Ring’s fault that my Wi-Fi network is a weak link in its communication chain, but this is a product that relies on home Wi-Fi to work in the first place. The problems I suffered reveal an intrinsic, inescapable weakness in Ring’s workflow, and should remind us that all Internet-connected home appliances are only as strong as the weakest link in their networks.
Just like with Wi-Fi, the Ring platform is at the mercy of smartphone conventions it can’t control. I can’t tell you whether the video screen delays are due to poor coding in Ring’s app, performance problems with my LG G4 smartphone, or hiccups in my phone’s Wi-Fi or 4G connectivity. But the bottomline is that simply getting to the video chat screen can be a long, frustrating experience. In a perfect world, I’d be able to launch the video chat display directly from the notification shade—and do so quickly. But Ring doesn’t have actionable notifications access.

The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.
Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.
My home lacks any sort of doorbell wiring, so the Video Doorbell 2’s battery-powered features appealed to me. To install it, I drilled two holes into the brick around my door, used the angled bracket provided in the box with the Video Doorbell 2 to angle it toward the doorway, and then mounted the actual doorbell to that. (A flat bracket is also provided.) The whole install process took about 10 minutes, since I didn’t have to actually wire anything up. If you have a more complicated setup, Ring provides video tutorials to walk you through it.

Ring says the battery should last anywhere from six to 12 months between charges, depending on how much activity your doorbell receives. Those claims might be a bit inflated, though. In my experience, the battery drained to under 40 percent in about six weeks of use, which means I’ll be recharging it every three months. For my testing, I had all the features enabled, such as motion detection and quick live view access. Ring says disabling these features will extend the battery life.


Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
By purchasing this system you’re almost certain that they will come out with upgrades and updates to this product and ways to integrate it with Alexa and smart home devices. If you encounter any kind of issues, they will have someone listen to you and actually give you a solution rather than one of these knock off Chinese products that will give you excuses for faulty behavior but not solutions.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
Now, on paper, this doesn’t sound like a frustrating process. And in best-case scenarios, the app would load as quickly as what you see in my video at the top of this article. But oftentimes these ostensibly brief steps would take forever. Sometimes my phone would be in another room. Sometimes I couldn’t quickly get it out of my pocket, or I’d fumble with my unlock code. But worst of all, sometimes the video chat screen would take an eternity to load.

UPDATE: 1 Year-On. We have had the Ring Pro for One full year now. I've also added two of the chime accessories. I'm just as happy with it now as I was when I wrote this review. We tried to trouble shoot the sound a few times and still have had no luck with it. I think my unit might just be defective in that area. However I still think if this was advertised as a camera only, it would be 100% worth the price and 5 stars. I did have someone point out the sticker over the ring might be the cause of our sound problem, removing it didn't help.


Setting up a smart security system requires you to consider the size of the space you want to protect, the tech capabilities that are most important to you, as well as the tech stack you want to use. Ring’s products are all Alexa-enabled, meaning they can be easily integrated into your existing smart home set-up. Plus, the company offers Protect Plus 24/7 Professional Monitoring for $10 per month. (Compare this to Nest’s similar service, which will ding you $19-29 over the same period.)

If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
Setting up a smart security system requires you to consider the size of the space you want to protect, the tech capabilities that are most important to you, as well as the tech stack you want to use. Ring’s products are all Alexa-enabled, meaning they can be easily integrated into your existing smart home set-up. Plus, the company offers Protect Plus 24/7 Professional Monitoring for $10 per month. (Compare this to Nest’s similar service, which will ding you $19-29 over the same period.)

The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.

OPI Origins Paula's Choice philosophy Shiseido smashbox Strivectin The Art of Shaving The Body Shop Victoria's Secret Bath & Body Works Bobbi Brown Bumble and Bumble Burt's Bees Carol's Daughter Clarisonic Clinique Crabtree and Evelyn AHAVA bareMinerals Dermablend Dermalogica Elizabeth Arden Estee Lauder Essie Jack Black Kiehl's Lancome Murad NYX See All Beauty Brands


Feel the difference Baldwin hardware is solid throughout Feel the difference Baldwin hardware is solid throughout with a 60 year legacy of superior style and quality. Baldwin is the choice for an elegant and secure presence. Baldwin guarantees the beauty of our finishes and the performance of our craftsmanship for as long as you own your home.  More + Product Details Close
×