This is probably the best part about this alarm, that there is no need for a desktop PC to reach any advanced features and that you can configure it from anywhere. From arming the alarm from work (if you forgot to arm it before leaving), to disarming remotely if needed. App is extremely user friendly and very intuitive, so this is probably the best part. Very well organized and all Ring devices can be controlled from within the same app.
2. If you want monitoring of video, check out SimpliSafe. They won’t monitor your motion events, but rather your sensors. If your sensors show an alarm event, they can log into your camera to gather video evidence. They offer what’s called ‘video verification.’ The downside to SimpliSafe, when compared to the options presented in this article, is that it lacks home automation. The system does support Nest Thermostats, Alexa, Google Assistant, and the August Smart Lock Pro, but it doesn’t offer an automation engine. Also, integrations are not free, which is in contrast to what abode, Ring, and Nest offer. Finally, SimpliSafe does not have an outdoor camera though they did recently release a video doorbell and have plans to launch an outdoor camera. abode, Nest, and Ring all lack professional monitoring of video and the cameras are not tied to the alarm as motion sensors. Camera motion activated events are self-monitored.
The beauty of all Ring products is that they’re free of long-term contracts and completely integrated with the user’s everyday tech. In other words, this ain’t your grandpa’s home security system. For no additional cost, the online home base will alert any selected users and devices when there’s unwanted movement in and around the house. For an additional $10/month, Ring users are upgraded to unlimited video recording (should they add a Ring doorbell or floodlight cam) and 24/7 professional monitoring from the Ring HQ.
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward. I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
What I like is the ease of setup. Very user friendly and quality components. The battery powered cameras offer a level of flexibility that our old wired cameras did not. Video is generally good to excellent (if you have a strong wifi router) and quite simple to customize the system to your particular needs (I don’t mind lack of 3rd party integration). And the $10 monthly price for monitoring and video storage is AMAZING (was paying almost $50/mo before).
We paid Ring $30 for each doorbell yearly fee ($60 for both) which allows Unlimited video storage. You also are able to "Share" the recorded video which allows you to email the videos as you wish. I also found the laptop Ring application. While working on my laptop I can receive notifications, watch the live video, and/or answer all from my laptop.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.
Thinking of your situation only….More than likely, you will need to buy an additional piece of hardware to upgrade your wired system to support newer technology, but it’s hard to say without more details. You might want to look into a device called Konnected. This would allow you to integrate your wired system with SmartThings which supports Ring cameras. You can read about that here. In my situation, they are not integrated, although most major home security companies now work with at least some third-party devices like Ring, Amazon Alexa, Google Home, August, etc.
Finally, you can add third-party Z-Wave and Zigbee devices. abode has a list of compatible devices on their site. The list includes products by Aeon, Aeotec, Enerwave, Fibraro, First Alert, FortrezZ, GE, Linear, Kwikset, Leviton, Schlage, Iris, Sensative, ZooZ, and Netvox. abode also sells their own Home Automation Power Outlet & ZigBee Extender. The device will turn any outlet into a smart outlet, allowing you to control plugged-in devices and include them as part of your automation recipes. The switch also acts as a ZigBee range extender.
So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.
Third, Nest Guard has a voice. Of course, it’s no Google Home, but it will provide useful information. For example, when you arm your system, there is an arm delay which allows you to exit your home without setting off the alarm. Instead of an annoying beep that continues until the system arms, Nest Guard uses a friendly voice to tell you how much time you have left.
In February 2018 at 2AM Ring came in handy. I received the "Motion Detected" alert on my phone and saw an unknown, adult, male, holding a large black object near his side, walking up my driveway, and towards my front door. The male looked directly at the Ring, stopped, turned around, walked back into the street, got into a vehicle and left. I like to believe Ring deterred this guy from committing a crime. After that moment I remembered I never did an Amazon review for Ring. So here it is. Do yourself and/or family a favor and get the Ring. Peace of mind and makes life easier. SEE ATTACHED PICTURES FOR DETAILS.
You’ll need to connect the Pro to a doorbell transformer that supplies 16- to 24 volts of AC power. If your home already has a wired doorbell, it’s probably at this voltage, but you’ll need to check. And not every home has doorbell wiring. If yours doesn’t then you’ll need to install power at your porch (or get an electrician to do it) if you want to use this.
When Ring worked as advertised, it delivered on all its promises. I never had any suspicious characters press the button, but I blew my neighbor’s mind when I communicated with her—quite easily, through the doorbell—while I was on vacation in wine country, 80 miles away. Unfortunately, I couldn’t help her get into her house (she had locked herself out), but it was a striking illustration of what Ring can do.
When you attach the Ring Video Doorbell Pro from Ring to your existing hardwired doorbell, you are able to monitor your front door area using your mobile device. The Ring Doorbell Pro features 1920 x 1080 resolution for high-quality images, and it has built-in IR LEDs for use at night or in low-light conditions. The camera has a 160° field of view for a wide coverage area, and integrated 2-way audio allows you to listen and respond to those you are monitoring
If the security device isn’t try to prevent jamming at all (And the protocol is one way – from sensor to main hub), all the thief need is a 10$-30$ device (definitely not close $1,000) which actively send signals and prevent the good signal to pass (the cheap signal jammer can be adjusted to frequency like you turn on a radio. the frequency itself is probably common in all devices or can be found on device manual) [not putting a security sign is https://en.wikipedia.org/wiki/Security_through_obscurity but it may be better than nothing].
Ring Doorbell cameras are some of the most popular options on the market today. But, it can be confusing to determine which one is right for your needs (there are quite a few to select from). However, these doorbells are designed to be very reliable, easy to install, and simple to use. They allow you to see, hear, and speak to those people who come to your door. You can access the doorbell camera from your computer, tablet, or through an app on your mobile phone. Here is a look at some of the options.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Despite our internet running at 300mpbs or faster, our Ring struggles to pick up a solid signal from our router, which is no more than 15 feet from the RING. The several times I've contacted the Ring support team they've been very friendly. They even sent us a signal boosting Chime Pro for free to help with the signal problem. Unfortunately this only made the signal worse according to the support team.