Unlike the other options, Ring cameras don’t integrate with the security system. Sure you can monitor them all using a single mobile app, but there is no “if this, then that” relationship. If your alarm sounds, your cameras will not record. If your cameras detect motion, they won’t trigger your alarm. However, there is one major benefit to using Ring cameras: If you pay $10 per month, you will gain access to cloud storage and professional monitoring with cellular backup.
The biggest physical difference between the Doorbell 2 and the original is the new, slide-out battery. With the first model, recharging the battery required removing the entire doorbell from the frame and plugging it in for five to six hours. The new, removable battery (which looks like something you might find in a DSLR or camcorder) is much easier to charge: you just remove the front panel of the doorbell (a security screw underneath needs to be removed with the included screwdriver first), slide the battery out, and plug that into a Micro USB cable. Charging still takes five or six hours — it’s a hefty, 6,100mAh battery and this doesn’t have any quick charging features you might find on a smartphone — but the modularity of this design means you can buy a second battery and put that in to keep your doorbell functional while the other charges. Ring provides one battery in the box, but you can buy spares from Ring’s website for a reasonable $20.
With 1080HD video, custom motion zones and an ultra-slim design, Ring Video Doorbell Pro is our most advanced Doorbell yet. Ring Video Doorbell Pro sends you instant mobile alerts when anyone presses your Doorbell or triggers the built-in motion sensors. When you answer the alert, you can see, hear and speak to visitors from your smartphone, tablet or PC. With customizable motion zones, Ring Pro lets you focus on the most important areas of your home. It also includes four interchangeable faceplates, so you can pick a color that matches your style and your home. And with our complementary tool kit, you can get your Doorbell set up in just minutes.
When we reviewed the original Ring Video Doorbell three years ago, it earned high marks for its easy installation, sharp video quality, and motion detection, but was dinged for its middling audio quality, lack of on-demand video, and short battery life. With the new Video Doorbell Pro ($249), Ring has addressed all of these gripes and added some handy features including 1080p video, custom motion zones, pre-buffering to capture what was going on before the motion sensor was triggered, support for Alexa voice commands, and interoperability with other smart devices via IFTTT. All this earns it our Editors' Choice for video doorbells.
Just like with Wi-Fi, the Ring platform is at the mercy of smartphone conventions it can’t control. I can’t tell you whether the video screen delays are due to poor coding in Ring’s app, performance problems with my LG G4 smartphone, or hiccups in my phone’s Wi-Fi or 4G connectivity. But the bottomline is that simply getting to the video chat screen can be a long, frustrating experience. In a perfect world, I’d be able to launch the video chat display directly from the notification shade—and do so quickly. But Ring doesn’t have actionable notifications access.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
The system was quite easy to install. Having six sensors to place seems like a lot, until you realize you can’t cover everything though you can certainly cover enough. I found the system to be very responsive whenever it was armed or a sensor was set off (both the app and e-mail notifications were received mere seconds after an event). This is in marked contrast to a non-Ring security camera I use to monitor the entrance that can take several minutes or longer to send me notifications. The siren too was fairly loud, as I found out one early weekend during testing.
Ring can be hardwired to your existing doorbell’s electrical leads, but lacking any doorbell at all, I opted to use the device’s internal battery, which is charged with a USB cable (just like any typical mobile device), and is rated to last one year between charges. Pulling off the doorbell for recharging is a simple matter of removing two screws with a special tool that Ring provides, and then sliding the doorbell off a backing plate. It’s no big deal.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
Once your trial of ring video recording ends, you can no longer access past events without a paid subscription. That's not such a big deal until you realize what counts as a "recent event". If you don't press the button within about 5 seconds of getting a motion alert, you missed your shot and now it's a past event. Say the UPS guy comes, presses the doorbell and walks off immediately. Your phone properly notifies you that somebody is at your door, but you've got something in your hands, or your phone is in your pocket or any other distraction is going on that takes 5 seconds to finish. By the time you hit the notification banner and go into the app, it will take you to a screen that says you need a paid subscription to see past events. Earlier today I got a notification WHILE holding my phone, clicked it immediately, but the live video loaded slowly and by the time it did load, the "event" was considered done and it took me to the screen saying I needed to pay. I have no problem paying to record everything and be able to pull up events from hours, days or weeks ago, but needing to pay because 5 seconds went by and the app loaded slowly is a rip-off. This is a $200 item which replaces a $5 hardware store doorbell, and the ONE thing it's supposed to do (show you live video of rings or motion events at your door) doesn't work about half the time without paying extra. There needs to be about a 30 second window at minimum where you can see what's going on without having to pay extra.