Ring is a Wi-Fi connected doorbell and exterior lighting security system that was recently purchased by Amazon. They don’t offer any type of home automation features; however, their system is compatible with many third-party smart home systems. However, Ring has announced that they will soon be adding interior home security and environmental protection features to their current lineup.


Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
If it's an entry sensor you're installing, Ring will ask what kind of door it is to apply the right sort of security to it — if it's your front door, for instance, it will use an entry countdown when you open the door while the base station is in Home and armed mode.  If it’s the back door that's opened in this mode, the alarm will sound immediately.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.
In fact, some of my neighbors might testify to this. After Ring sent me the review unit, they also seeded some 20 of my neighbors with Rings of their own. The goal was to turn my neighborhood into something of a test bed for measuring how the doorbell can be deployed to reduce crime (or at least give homeowners more confidence in their own home security). Using the NextDoor social network, I asked neighbors for reviews.
The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.
The Ring Doorbell Camera security system was acquired by Amazon. They currently offer doorbell cameras and exterior security lighting cameras. And according to their website product page, Ring will soon be adding indoor security and environmental protection products to their lineup as well. This is great news based on how popular their current products have become.
3) Operational Use. I like being able to set up polygons for the motion detection zones. I was able to easily mark my drive way, flowerbeds and porch. I’ve never had a problem with the busy traffic from the road (something the security guy mentioned was a problem with his original Ring). There are two problems they need to work out: You will get a motion detect when the night vision clicks on in the evening and when it clicks off in the morning. Expect that.
Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
But those were only best-case scenarios. Throughout real-world testing with visiting strangers as well as staged testing with friends, I oftentimes experienced very long latencies between the button press and a phone notification. Sometimes the lag would last up to three or four seconds. And sometimes I wouldn’t receive any smartphone notification at all. Case in point: the hapless pizza delivery guy who pressed the Ring button two times before giving up, and calling my phone.
I got the Costco version a month ago. Very happy with the system. I came from Simplisafe, while I liked that service you had to pay for $25/mo plan in order to use their App (basic monitoring is $15/mo for Simplisafe). Rings app is waaaay better and is free to use even without monitoring, I'm currently on my home monitoring trial with Ring, but will definitely sign up for the full year with no hesitation (1/3 of the cost I was paying). No issues integrating the First Alert Smoke and CO detectors (Simplisafe can only use their products). Also if you have ring cameras the recordings for that are included in the $10/mo or $100/yr
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.
Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."

This rugged camouflage backpack is full of emergency This rugged camouflage backpack is full of emergency supplies that will ensure that you are prepared to survive if you find yourself stranded or injured in the wilderness or other remote location. The contents have been carefully selected so that you can survive the first critical 72 hours of an ...  More + Product Details Close


As a Contributing Editor for PCMag, John Delaney has been testing and reviewing monitors, TVs, PCs, networking and smart home gear, and other assorted hardware and peripherals for almost 20 years. A 13-year veteran of PC Magazine's Labs (most recently as Director of Operations), John was responsible for the recruitment, training and management of t... See Full Bio
The camera's motion sensor worked without a hitch, as did the pre-buffer feature. I always received a push notification, and the camera never failed to record a clip when the sensor was triggered or when the doorbell button was pressed. I created an IFTTT applet to have a D-Link Smart Switch turn on a lamp whenever the doorbell button was pressed, and it worked without fail, as did my Alexa voice command to display the Ring Pro's live stream on my TV using an Amazon Fire TV Stick and Amazon Echo.
There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
At 4.5 by 1.8 by 0.8 inches (HWD), the Ring Pro is slimmer and looks more like a traditional doorbell than the August Doorbell Cam Pro, the RemoBell, and the original Ring. It comes with four interchangeable faceplates (black, bronze, nickel, and white) to match the exterior of your home, a screwdriver, mounting screws and anchors, a Pro Power Kit for connecting to an existing chime box in case your existing doorbell wiring does not provide enough power, extension wires, and illustrated instructions. Ring also sells a battery-powered model, the Video Doorbell 2.
The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.

So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.
×