My Wi-Fi problems notwithstanding, both the doorbell and chime accessory were easy to pair with my wireless network. Just a word of caution: If you’re using a Wi-Fi range extender, make sure to pair the doorbell outside your house, right on your doorstep. This will ensure that Ring finds the extender, and not your router. If you pair the doorbell inside your home, you run the risk of pairing it with your main Wi-Fi router, especially if your router and range extender have different names.


Through Works with Nest, abode works with Nest Protect, Nest Thermostat, and Nest Cam. Using this integration, you have the option to sync your abode modes with Nest modes or keep them separate. The abode system also offers deep integration with the Nest Thermostats. From the abode app, you can access and control your home’s temperature and create temperature thresholds. The same is true for ecobee users.

The Ring Alarm Security Kit should be every buyer’s first purchase when organizing their security system. It comes with a base station, which is like the central command hub for your Ring devices. The base station connects to your internet to keep your alarm system online; it can also activate sensors and receive notifications from your connected devices.
Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
Feel the difference Baldwin hardware is solid throughout Feel the difference Baldwin hardware is solid throughout with a 60 year legacy of superior style and quality. Baldwin is the choice for an elegant and secure presence. Baldwin guarantees the beauty of our finishes and the performance of our craftsmanship for as long as you own your home.  More + Product Details Close
Ring is a Wi-Fi connected doorbell and exterior lighting security system that was recently purchased by Amazon. They don’t offer any type of home automation features; however, their system is compatible with many third-party smart home systems. However, Ring has announced that they will soon be adding interior home security and environmental protection features to their current lineup.
It’s worth noting that my Wi-Fi network is based on a Linksys 802.11ac router that’s connected to a Linksys Wi-Fi range extender located about 10 feet from the Ring doorbell (albeit separated by a thick exterior wall). I spent a significant amount of time with Ring’s operations director to fix connectivity problems in the early stages of testing, but even this wasn’t enough to solve all the performance issues. My Wi-Fi is dual-band, supporting both 2.4- and 5GHz, but Ring uses the 2.4GHz band via 802.11b/g/n support.
Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.

Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
By removing the battery, Ring has been able to make the Ring Video Doorbell Pro a bit slimmer and smaller than its first- and second-generation models. The Pro measures 4.5 inches x 1.85 inches x 0.8 inches (11.4 centimeters x 4.7 centimeters x 2.0 centimeters). That’s 6.7 cubic inches (108 cubic centimeters) versus 13.6 cubic inches (223 cubic centimeters) for the Ring Video Doorbell 2—an impressive reduction in volume of more than half.
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.
1. Nest can record continiously which eliminates the problem of sleepy security cameras. As far as Ring cameras, Ring Pro offers a pre-buffer. As far as their other cameras, I’ve only tried Ring Spotlight wireless. It’s a battery-powered camera and does not pre-buffer. I believe I heard that the wired version does pre-buffer, but I haven’t personally tried it.
Unfortunately, Ring doesn’t currently, nor does it appear to be adding any type of home automation features, but it is compatible with many third-party smart home services. Although Ring doesn’t offer professional monitoring services, they do offer live streaming when hardwired to your existing doorbells power supply. Ring Live View does not work when using the internal battery. Since most users prefer to use the Ring internal battery, paying for one of the Ring video recording packages is the ideal option.
This versatile Hampton Bay Door Bell Chime works This versatile Hampton Bay Door Bell Chime works in any home installation. For a Wired installation you'll need a Wired Push Button and a 16 VAC/10 VA Low-Voltage Transformer. To use wirelessly you'll need 3 "C" batteries and a Hampton Bay Wireless Push Button. Replacing your current basic Door Bell ...  More + Product Details Close
I installed a motion sensor inside a shed in my backyard (shed has a tin metal roof) and I kept getting a false alarm daily usually around 1 or 2pm; Ring informed me that their motion sensors use infrared technology and that excessive heat could cause a false trigger. They told me a contact sensor at the shed’s door should do the job and that’s what I will be doing next.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.

Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.
Feel the difference - Baldwin hardware is solid Feel the difference - Baldwin hardware is solid throughout with a 60 year legacy of superior style and quality. Baldwin is the choice for an elegant and secure presence. Baldwin guarantees the beauty of our finishes and the performance of our craftsmanship for as long as you own your home. ...  More + Product Details Close
×