If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
We paid Ring $30 for each doorbell yearly fee ($60 for both) which allows Unlimited video storage. You also are able to "Share" the recorded video which allows you to email the videos as you wish. I also found the laptop Ring application. While working on my laptop I can receive notifications, watch the live video, and/or answer all from my laptop.
In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
Most of my setup time was spent testing the position of the three contact sensors I received. The magnetic sensors consist of two parts. One part goes on a door or window frame, the other part goes opposite it so that when the door or window is opened, the magnetic connection is broken. If the two pieces aren't close enough, roughly half an inch, the sensor doesn't work.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
The Alarm system does not have as many bells and whistles as Nest’s system, nor does it have some of the conveniences Nest provides. But at $199 for the starter bundle, which includes the necessary hub, a keypad, a motion detector, a contact sensor for doors or windows, and a range extender, plus $10 per month for professional monitoring, Ring’s system is significantly cheaper than Nest Secure (which was just recently reduced to $399 for its starter kit) and is one of the least expensive home security systems you can purchase.
The system was quite easy to install. Having six sensors to place seems like a lot, until you realize you can’t cover everything though you can certainly cover enough. I found the system to be very responsive whenever it was armed or a sensor was set off (both the app and e-mail notifications were received mere seconds after an event). This is in marked contrast to a non-Ring security camera I use to monitor the entrance that can take several minutes or longer to send me notifications. The siren too was fairly loud, as I found out one early weekend during testing.
The Nest Guard motion sensor can detect motion within a 90° field of view up to 10 feet away. It also includes tamper detection as well as a proximity sensor (wakes on approach) and will let you know if it’s moved or if someone tries to jam your signal. However, in testing, I found that none of the promised tamper sensors worked. I did not test jamming detection.
There are many great brands out there that make it easy for you to find the security products that fit your unique needs. Two such options are the Ring and Nest systems. These popular brands have developed a range of products to help you easily build and customize your home security ecosystem. In order to help you choose the right system for you, we’ve broken down the pros and cons of each. Here’s a quick rundown of the main features you should keep in mind when deciding between the two:

I would go beyond resolution and consider what you want the camera to do. My favorite outdoor camera is Arlo Pro, but a battery-powered outdoor camera will come with its own challenges. In my front yard, I need 24/7 continuous recording which is Nest, but I can’t deal with the way the giant wire looks on Nest Outdoor so I used Nest Cam Indoor filming through a window for a couple of years, which also has its own challenges, until I swapped out my Ring Doorbell for Nest Hello. Nest Hello is Nest’s video doorbell and it can record continuously.


The Ring Doorbell Pro comes with 30 days of Cloud recordings, however, if you would like to record footage after this, you will need to purchase a monthly or yearly Cloud subscription. With the subscription, you will be able to view and download up to 6 months of recordings, and you will also be able to share recordings with friends, neighbors, and law enforcement. Additionally, you can permanently save files that are important to you and delete any unwanted files. The package also includes mounting hardware and a power kit.

Where abode Wins: abode offers free cloud storage, and they offer the widest range of equipment including glass break and flood sensors which are viewed as essential home security devices. Also, abode uses an open platform allowing more third-party integrations via Z-Wave and Zigbee backed by their CUE automation engine. It’s true that Ring offers Z-Wave and Zigbee too, but details on compatible products are still scarce. Fourth, abode has more home security experience than Nest and Ring.
The real failure of this device is its “motion detection”. To illustrate, I’ve attached photos and video. It goes off about every 5 minutes (leaving battery life that lasts 3 days), even for things across the street, even though it’s supposed to have a 5’ range (also attached). The kicker is that it Doesn’t actually catch people coming up to the door. It only shows me coming in our out about 1 in 10 times. I even thought about making a video to show this, but it’s not worth my time for this Piece of junk. Bottom line:
×