In fact, some of my neighbors might testify to this. After Ring sent me the review unit, they also seeded some 20 of my neighbors with Rings of their own. The goal was to turn my neighborhood into something of a test bed for measuring how the doorbell can be deployed to reduce crime (or at least give homeowners more confidence in their own home security). Using the NextDoor social network, I asked neighbors for reviews.
To start I shut off the breaker that powers my existing doorbell before removing it and detaching the two wires. I slid off the Ring Pro's detachable faceplate and attached the two wires to the terminals. I then attached the doorbell to the outside of my house using the included mounting screws. I already had a Ring account from previous reviews but if you haven't created one, now's the time to download the app and do so.

From what I understand, it’s not so much a matter of just buying a device, but also programming it to the exact frequency that matches your alarm system. (Which makes an interesting case for not using a security sign, but that’s another debate.) That said, a really good signal jammer can cost upwards of $1,000, and as CNET pointed out, they would still have to smash a window or break down your door. The guy who wants money for his addiction isn’t going to spend the money and effort needed to pull off a jamming heist. Of course, if you are a public figure or might be the target of a more complex attack, I would suggest looking into a wired alarm system.

1. Nest can record continiously which eliminates the problem of sleepy security cameras. As far as Ring cameras, Ring Pro offers a pre-buffer. As far as their other cameras, I’ve only tried Ring Spotlight wireless. It’s a battery-powered camera and does not pre-buffer. I believe I heard that the wired version does pre-buffer, but I haven’t personally tried it.
As far as Ring Alarm, I don’t have an answer for you, but I understand and appreciate the knowledge you’ve shared. I would also agree that if they haven’t advertised jamming detection, that’s probably because it doesn’t exist. A Twitter friend of mine, who works for Underwriters Laboratories (UL), also mentioned that the system is not UL certified. Again, probably not as important to you as this jamming issue, but something interesting to note.
Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
My home lacks any sort of doorbell wiring, so the Video Doorbell 2’s battery-powered features appealed to me. To install it, I drilled two holes into the brick around my door, used the angled bracket provided in the box with the Video Doorbell 2 to angle it toward the doorway, and then mounted the actual doorbell to that. (A flat bracket is also provided.) The whole install process took about 10 minutes, since I didn’t have to actually wire anything up. If you have a more complicated setup, Ring provides video tutorials to walk you through it.
Ring Alarm hits nearly all the right notes for a basic DIY home security system. I’ve already touched on a couple of its shortcomings—including an absence of support for smart speakers—but tighter integration with Ring’s own cameras would be another welcome development. When an alarm is tripped, the cameras should begin recording to perhaps capture a glimpse of what triggered it—potentially valuable forensic evidence you could provide to the police investigating a break-in. And if Ring Alarm could control your home’s smart lighting, it could turn on all the lights if the alarm is triggered after dark, which might convince an intruder to make a hasty retreat.

All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.

Ring says the battery should last anywhere from six to 12 months between charges, depending on how much activity your doorbell receives. Those claims might be a bit inflated, though. In my experience, the battery drained to under 40 percent in about six weeks of use, which means I’ll be recharging it every three months. For my testing, I had all the features enabled, such as motion detection and quick live view access. Ring says disabling these features will extend the battery life.

Update 1/24/16 - I have found a fantastic use for the Ring Doorbell and Chime. My mother-in-law, now in her 90s, lives by herself. She has become hard-of-hearing and often does not hear the doorbell. By installing the Ring on her door, she now is bothered much less (solicitors tend to recognize it and don't seem to like it) and when someone rings the bell, the Chime, placed by her favorite chair, gives her a better chance of hearing someone at the door.