Ring’s sensors operate on battery power, the keypad and base station come with AC adapters, and the Z-Wave range extender plugs directly into an AC outlet. All three of those components have battery backup, so the system will continue to operate in the event of a power outage. The base station connects to your home network via hardwired ethernet or Wi-Fi. A Ring Protect subscription activates an LTE module in the base station that will keep the system connected to the internet if your broadband connection goes down. You can even run the keypad on battery power full time if you choose, since most homes don’t have AC outlets right next to doors. An LED will tell you when the battery needs to be charged.
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
By purchasing this system you’re almost certain that they will come out with upgrades and updates to this product and ways to integrate it with Alexa and smart home devices. If you encounter any kind of issues, they will have someone listen to you and actually give you a solution rather than one of these knock off Chinese products that will give you excuses for faulty behavior but not solutions.
The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
The Ring Alarm Security Kit should be every buyer’s first purchase when organizing their security system. It comes with a base station, which is like the central command hub for your Ring devices. The base station connects to your internet to keep your alarm system online; it can also activate sensors and receive notifications from your connected devices.
I set up the new system with ease. It Took about 45 minutes! I have to give props to Mr. Siminoff for adding in this 7 day training period which allowed me to learn the new equipment without the fear of having the authorities show up. Thank God someone is thinking outside the box. My last alarm system that was much more expensive and hardwired, came with no training at all and no grace period for learning. As a result, I set it off multiple times by mistake and actually got a fine from my town because the cops showed up to the false alarm. That said, this was a much better initial experience.
The Ring Pro uses the same Android and iOS mobile app as other Ring devices. It opens to a My Devices screen that has a button for each installed Ring device at the top, as well as a Neighborhood button. Like the Floodlight Cam, the Ring Pro offers a Neighborhood feature that lets you share recorded events with neighbors who have downloaded the Ring app and joined the Neighborhood. You'll receive an alert when a neighbor posts a video, as well as for activities such as fire and police action in your neighborhood.
As far as Ring Alarm, I don’t have an answer for you, but I understand and appreciate the knowledge you’ve shared. I would also agree that if they haven’t advertised jamming detection, that’s probably because it doesn’t exist. A Twitter friend of mine, who works for Underwriters Laboratories (UL), also mentioned that the system is not UL certified. Again, probably not as important to you as this jamming issue, but something interesting to note.
From what I understand, it’s not so much a matter of just buying a device, but also programming it to the exact frequency that matches your alarm system. (Which makes an interesting case for not using a security sign, but that’s another debate.) That said, a really good signal jammer can cost upwards of $1,000, and as CNET pointed out, they would still have to smash a window or break down your door. The guy who wants money for his addiction isn’t going to spend the money and effort needed to pull off a jamming heist. Of course, if you are a public figure or might be the target of a more complex attack, I would suggest looking into a wired alarm system.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras, a settings panel for configuring professional monitoring and what each mode does when activated.
The Ring system offers many different types of cameras; which one (or ones) you choose will depend on your unique configuration needs. The Ring Stick Up Cam is a fairly versatile option, letting you monitor both indoor or outdoor areas in 1080p HD video. It can also rest on a flat surface or be mounted to a wall or ceiling. Like the Ring Doorbell, this camera allows two-way talk, so you can see and speak to whoever’s on the other end of the lens using your phone or connected device.
At 4.5 by 1.8 by 0.8 inches (HWD), the Ring Pro is slimmer and looks more like a traditional doorbell than the August Doorbell Cam Pro, the RemoBell, and the original Ring. It comes with four interchangeable faceplates (black, bronze, nickel, and white) to match the exterior of your home, a screwdriver, mounting screws and anchors, a Pro Power Kit for connecting to an existing chime box in case your existing doorbell wiring does not provide enough power, extension wires, and illustrated instructions. Ring also sells a battery-powered model, the Video Doorbell 2.
Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.
In fact, some of my neighbors might testify to this. After Ring sent me the review unit, they also seeded some 20 of my neighbors with Rings of their own. The goal was to turn my neighborhood into something of a test bed for measuring how the doorbell can be deployed to reduce crime (or at least give homeowners more confidence in their own home security). Using the NextDoor social network, I asked neighbors for reviews.
True. I do feel like I touched on most of my “what’s best” thoughts in the Final Thoughts section. I would take from abode the free and vast integrations which extend to its ability to work with so many security-related devices (glass break sensors, flood sensors, freeze sensors, key fobs, etc.). I would also take their optional on-demand monitoring plans, free cloud storage, and geofencing. I would take from Nest their fabulous camera technology, design, and overall experience (voice prompts, clean app experience, etc.). From Ring, I would take pricing and extended battery backup.
Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
I’m confident that if Ring were a closed system—hardwired to my home network, and not at the mercy of Wi-Fi and smartphone connections—signal reliability would be a non-issue. But we’re in the wild, wild west of cloud-connected smart-home devices. The Internet of Things (ugh—that word!) is riddled with weak links, and neither Ring nor its smart-home brethren can control the infrastructure’s frequent unpredictability.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
2. If you want monitoring of video, check out SimpliSafe. They won’t monitor your motion events, but rather your sensors. If your sensors show an alarm event, they can log into your camera to gather video evidence. They offer what’s called ‘video verification.’ The downside to SimpliSafe, when compared to the options presented in this article, is that it lacks home automation. The system does support Nest Thermostats, Alexa, Google Assistant, and the August Smart Lock Pro, but it doesn’t offer an automation engine. Also, integrations are not free, which is in contrast to what abode, Ring, and Nest offer. Finally, SimpliSafe does not have an outdoor camera though they did recently release a video doorbell and have plans to launch an outdoor camera. abode, Nest, and Ring all lack professional monitoring of video and the cameras are not tied to the alarm as motion sensors. Camera motion activated events are self-monitored.
Ring offers a wide variety of doorbell and exterior security lighting features that range in price from $99.99 to $499.00, as well as plenty of accessories for them that range in price from $10.00 to $49.00. These accessories include options such as a solar panel, ring chime, quick release battery pack and more. And, they have two monthly video recording packages that range from $3.00 per month ($30 annually) to $10.00 per month ($100 annually).