I opened the app, tapped Set Up Device, selected Doorbells, and selected the Pro from the list of choices. I named the device, entered my address (optional), and hit Continue. At this point you can play an instructional video if you're having difficulty. Next I was asked what type of bell my existing doorbell uses (mechanical, digital, none) and was prompted to press and release the button on the side of the Pro, at which point a voice informed me that I was entering setup mode. I hit Continue and was prompted to navigate to my phone's Wi-Fi settings and connect to the Ring network. I returned to the app and selected my home Wi-Fi SSID, entered my password, and waited around 20 seconds before the doorbell was connected. I attached the faceplate and was finished.
While the August doorbell offers a more symmetrical picture with no barrel distortion, it doesn't support IFTTT integration like the Ring Pro does, and Ring's monthly cloud fees are a bit more affordable. As such, the Ring Video Doorbell Pro is an Editors' Choice for smart doorbells. The SkyBell HD is another top pick, and offers features that Ring doesn't, such as color night video, free cloud recording, and compatibility with Nest smart home devices.
The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.
So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.
Ring also doesn't currently offer any additional security accessories, but it plans to add a leak sensor and other devices at some point. And while your Ring security cameras and video doorbells ($250 at Amazon) live in the same app as your Ring Alarm Security Kit, there aren't any direct integrations between them today. I'd like to see something like, "If the Ring Alarm Security Kit's front door sensor notices that the door is opened in Home or Away mode, then tell my Ring Video Doorbell Pro to record automatically" -- even if the Video Doorbell Pro itself hasn't detected motion yet.
Second, Ring sells a contact sensor. The two-piece sensor can be placed on doors or windows and will notify you of open/close movements. Third, they sell a pet-friendly motion detector. Fourth, they sell a range extender. The range extender is the only sensor that requires AC power, but it also includes 24-hour battery backup. The Range Extender is used to boost the signal emitted by your Base Station to help eliminate dead zones.
My home lacks any sort of doorbell wiring, so the Video Doorbell 2’s battery-powered features appealed to me. To install it, I drilled two holes into the brick around my door, used the angled bracket provided in the box with the Video Doorbell 2 to angle it toward the doorway, and then mounted the actual doorbell to that. (A flat bracket is also provided.) The whole install process took about 10 minutes, since I didn’t have to actually wire anything up. If you have a more complicated setup, Ring provides video tutorials to walk you through it.
The system was quite easy to install. Having six sensors to place seems like a lot, until you realize you can’t cover everything though you can certainly cover enough. I found the system to be very responsive whenever it was armed or a sensor was set off (both the app and e-mail notifications were received mere seconds after an event). This is in marked contrast to a non-Ring security camera I use to monitor the entrance that can take several minutes or longer to send me notifications. The siren too was fairly loud, as I found out one early weekend during testing.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
The company’s latest product, the $199 Ring Video Doorbell 2, was released earlier this summer, and it improves upon the original product in a number of ways. It provides higher-resolution video output — 1080p verses the 720p of the original — and makes it easier to recharge the unit’s internal battery if you don’t have it hardwired into your home’s electrical system.
Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.