If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.
Whatever connection your doorbell ends up using, Ring recommends having a broadband upload speed of at least 1Mbps, with 2Mbps preferred. That’s typically not a problem with cable modems, but it can present a challenge to DSL gateways. The video doorbell won’t use this uplink connection all the time, it’s active only while you’re streaming video or when its motion detection triggers video capture that’s uploaded to the cloud.
Other Devices Image Sensor, Smart Switch, Extra Siren, Temperature, Humidity & Light Sensor, Water Leak Sensor, iota Smart Doorbell, Range Extender, Smart Deadbolt Lock (Nest x Yale) Video Doorbell (Pro, Elite, 2), Spotlight Cam, Floodlight Cam, Stick Up Cam, Chime, Chime Pro, Solar Panel, Solar Sign, Ring Beams, Smoke & CO Listener, First Alert Smoke/CO Alarm, Flood and Freeze Sensor Satellite Siren, Smart Switch, Yard Sign
In fact, some of my neighbors might testify to this. After Ring sent me the review unit, they also seeded some 20 of my neighbors with Rings of their own. The goal was to turn my neighborhood into something of a test bed for measuring how the doorbell can be deployed to reduce crime (or at least give homeowners more confidence in their own home security). Using the NextDoor social network, I asked neighbors for reviews.
To start I shut off the breaker that powers my existing doorbell before removing it and detaching the two wires. I slid off the Ring Pro's detachable faceplate and attached the two wires to the terminals. I then attached the doorbell to the outside of my house using the included mounting screws. I already had a Ring account from previous reviews but if you haven't created one, now's the time to download the app and do so.
Thinking of your situation only….More than likely, you will need to buy an additional piece of hardware to upgrade your wired system to support newer technology, but it’s hard to say without more details. You might want to look into a device called Konnected. This would allow you to integrate your wired system with SmartThings which supports Ring cameras. You can read about that here. In my situation, they are not integrated, although most major home security companies now work with at least some third-party devices like Ring, Amazon Alexa, Google Home, August, etc.
If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.
This one is for anyone who lives in a medium to large size house. The Ring Chime Pro boosts the Wi-Fi signal from your router so that even your most remote Ring devices are supported. This also amplifies any notifications they send. Most users have found that this significantly improves the strength of their doorbells, which makes sense as the front door is often far away from your living room or office. Possibly the simplest item to install on this list, simply plug the Ring Chime Pro into a wall outlet and you’re good to go.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
As far as actually using the Video Doorbell 2, my experience was largely positive. The video that’s streamed live from the doorbell is bright and has decent resolution, and the IR sensors around the camera make it possible to see visitors at night, too. Connecting to the camera through the smartphone app was quick, even if I wasn’t home and had to use LTE, and the two-way microphone and speaker made it possible to talk to visitors directly. I was even able to view the camera’s feed on Amazon’s Echo Show — though it doesn’t support two-way audio, and I had some trouble connecting to the camera at times.
The beauty of all Ring products is that they’re free of long-term contracts and completely integrated with the user’s everyday tech. In other words, this ain’t your grandpa’s home security system. For no additional cost, the online home base will alert any selected users and devices when there’s unwanted movement in and around the house. For an additional $10/month, Ring users are upgraded to unlimited video recording (should they add a Ring doorbell or floodlight cam) and 24/7 professional monitoring from the Ring HQ.
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.
From the app, you can control and manage your Nest Secure system. Of course, you can arm and disarm your system, but you can also see sensor status as well as sensor history. For example, you can see if your door is open or closed and you can see when it was last opened and last closed. You can also use the app’s Remind Me feature to remind you to arm your system if you forget to do so.
Ring offers a wide variety of doorbell and exterior security lighting features that range in price from $99.99 to $499.00, as well as plenty of accessories for them that range in price from $10.00 to $49.00. These accessories include options such as a solar panel, ring chime, quick release battery pack and more. And, they have two monthly video recording packages that range from $3.00 per month ($30 annually) to $10.00 per month ($100 annually).
So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.
Ring Alarm hits nearly all the right notes for a basic DIY home security system. I’ve already touched on a couple of its shortcomings—including an absence of support for smart speakers—but tighter integration with Ring’s own cameras would be another welcome development. When an alarm is tripped, the cameras should begin recording to perhaps capture a glimpse of what triggered it—potentially valuable forensic evidence you could provide to the police investigating a break-in. And if Ring Alarm could control your home’s smart lighting, it could turn on all the lights if the alarm is triggered after dark, which might convince an intruder to make a hasty retreat.
As soon as the alarm is tripped you will receive 2 phone calls (one on each registered number), if no one answers they will immediately dispatch the police. The approximate time for the police to be dispatched from the moment your alarm goes off to the time they call a dispatcher is about 4 minutes (that includes the time to complete the 2 call attempts made to you). Police will be dispatched with a description of the zone that triggered the alarm (ex: living room motion).
Once your trial of ring video recording ends, you can no longer access past events without a paid subscription. That's not such a big deal until you realize what counts as a "recent event". If you don't press the button within about 5 seconds of getting a motion alert, you missed your shot and now it's a past event. Say the UPS guy comes, presses the doorbell and walks off immediately. Your phone properly notifies you that somebody is at your door, but you've got something in your hands, or your phone is in your pocket or any other distraction is going on that takes 5 seconds to finish. By the time you hit the notification banner and go into the app, it will take you to a screen that says you need a paid subscription to see past events. Earlier today I got a notification WHILE holding my phone, clicked it immediately, but the live video loaded slowly and by the time it did load, the "event" was considered done and it took me to the screen saying I needed to pay. I have no problem paying to record everything and be able to pull up events from hours, days or weeks ago, but needing to pay because 5 seconds went by and the app loaded slowly is a rip-off. This is a $200 item which replaces a $5 hardware store doorbell, and the ONE thing it's supposed to do (show you live video of rings or motion events at your door) doesn't work about half the time without paying extra. There needs to be about a 30 second window at minimum where you can see what's going on without having to pay extra.