Ring can be hardwired to your existing doorbell’s electrical leads, but lacking any doorbell at all, I opted to use the device’s internal battery, which is charged with a USB cable (just like any typical mobile device), and is rated to last one year between charges. Pulling off the doorbell for recharging is a simple matter of removing two screws with a special tool that Ring provides, and then sliding the doorbell off a backing plate. It’s no big deal.
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras, a settings panel for configuring professional monitoring and what each mode does when activated.
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
Quiet Open allows you to bypass an armed sensor simply by touching it. For example, if your system is armed, but you want to check the weather outside, you can press the sensor, and open your door. While I’ve heard only praise for this feature, my initial reaction was that it seems like a security flaw. Your teenagers, for example, can press the sensor and sneak out. Furthermore, there is no identification tied to using the feature. For example, it won’t say, “Rose bypassed the sensor.” Fortunately, you can turn this feature off if you’re concerned.
The upshot: When that sketchy person comes to your door asking for “charitable donations,” you can compliment his appearance—nice prison tats!—and tell him you’re too busy to talk right now. Who knows, maybe you’re feeding your Belgian Malinois attack dogs. Or are you? The robber will never know that you’re actually speaking to him from a restaurant. In another state.
Ring also doesn't currently offer any additional security accessories, but it plans to add a leak sensor and other devices at some point. And while your Ring security cameras and video doorbells ($250 at Amazon) live in the same app as your Ring Alarm Security Kit, there aren't any direct integrations between them today. I'd like to see something like, "If the Ring Alarm Security Kit's front door sensor notices that the door is opened in Home or Away mode, then tell my Ring Video Doorbell Pro to record automatically" -- even if the Video Doorbell Pro itself hasn't detected motion yet.
Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.
It catches us leaving for work every day and coming home. It catches me when I go to fill the bird feeders. I’ve not had it miss any movement that I’m aware of. If you have motion sensors on, expect more notifications than you think you will get. As said, you’ll get the two from nightfall and sunrise. Plus I get two from me departing for work and my husband departing plus 2 more for each of us coming home. Add on more for checking the mail and anything you may do in the yard. This is where not being limited on storage size is handy. The cloud storage is $30 per year and it keeps videos for 6 months. It doesn’t say anything about size so having these extra videos doesn’t bother me. I find the video quality to be great and I can easily identify who is at the door night and day.
I’m confident that if Ring were a closed system—hardwired to my home network, and not at the mercy of Wi-Fi and smartphone connections—signal reliability would be a non-issue. But we’re in the wild, wild west of cloud-connected smart-home devices. The Internet of Things (ugh—that word!) is riddled with weak links, and neither Ring nor its smart-home brethren can control the infrastructure’s frequent unpredictability.
Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
With 1080HD video, custom motion zones and an ultra-slim design, Ring Video Doorbell Pro is our most advanced Doorbell yet. Ring Video Doorbell Pro sends you instant mobile alerts when anyone presses your Doorbell or triggers the built-in motion sensors. When you answer the alert, you can see, hear and speak to visitors from your smartphone, tablet or PC. With customizable motion zones, Ring Pro lets you focus on the most important areas of your home. It also includes four interchangeable faceplates, so you can pick a color that matches your style and your home. And with our complementary tool kit, you can get your Doorbell set up in just minutes.
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.
Setting up a smart security system requires you to consider the size of the space you want to protect, the tech capabilities that are most important to you, as well as the tech stack you want to use. Ring’s products are all Alexa-enabled, meaning they can be easily integrated into your existing smart home set-up. Plus, the company offers Protect Plus 24/7 Professional Monitoring for $10 per month. (Compare this to Nest’s similar service, which will ding you $19-29 over the same period.)
Throughout testing, I liked how I could verify the comings and goings of our dog walker simply by listening for the sound of the chime. The motion alert feature is ultra-sensitive, so I had to decrease its range to reduce false positives. I also found that it doesn’t begin recording video until someone has been at the door for a few moments. For example, the doorbell recorded a video of a delivery person leaving my door step, but I didn’t get video of him approaching and leaving my package.
In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
The backing plate is designed to mount on wood, brick, concrete, stucco, and aluminum siding, and the kit includes installation parts, like screws and a drill bit, to provide everything you’ll need. Unfortunately, using my cordless DeWalt drill, I couldn’t penetrate my home’s concrete, so I opted for heavy-duty double-sided tape. It works marvelously, and there’s a failsafe even if someone steals the doorbell: Ring will replace stolen doorbells free of charge, as long as you provide a police report.
The abode Gateway is responsible for communicating with and controlling all connected devices. Compared to Nest Secure, abode offers a wider array of equipment. Unfortunately, their equipment isn’t as modern looking as Nest’s nor do they offer any multi-purpose devices. However, they do sell everything you need to secure your home. Each Gateway can support up to 150 connected devices and up to six IP Streaming Cameras.
1. Correct. Geofencing is a free feature. I’m not sure what abode uses specifically, but generally, geofencing does require GPS or location services to be enabled. I know the system doesn’t use Bluetooth. My dad is using the system right now and he’s had problems with multi-user geofencing. I asked abode about it, but they just wanted to troubleshoot instead of discussing general performance. If I were to guess, I’d guess that it’s only using GPS to detect presence and not a combination of data like GPS and phone presence (Wifi).
The caller from the monitoring service will identify themselves as being from Ring, since that’s who your business relationship is with, but they actually work for a third-party company that Ring contracts with: Rapid Response Monitoring Services. This is a common arrangement for home security systems. Nest, for example, contracts with MONI Smart Security (which is now doing business as Brinks Home Security). Alarm.com is another major third-party monitoring service.
By removing the battery, Ring has been able to make the Ring Video Doorbell Pro a bit slimmer and smaller than its first- and second-generation models. The Pro measures 4.5 inches x 1.85 inches x 0.8 inches (11.4 centimeters x 4.7 centimeters x 2.0 centimeters). That’s 6.7 cubic inches (108 cubic centimeters) versus 13.6 cubic inches (223 cubic centimeters) for the Ring Video Doorbell 2—an impressive reduction in volume of more than half.
While fairly similar to the Ring Stick Up Cam, the Spotlight Cam is built for the outdoors. That means it comes with a few added security features, such as a siren that you can activate remotely to scare away anyone who triggers its motion detector. The camera is also built with infrared night vision, meaning you’ll be able to check in on your home and your surroundings when you need to the most.
System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.
I got the Costco version a month ago. Very happy with the system. I came from Simplisafe, while I liked that service you had to pay for $25/mo plan in order to use their App (basic monitoring is $15/mo for Simplisafe). Rings app is waaaay better and is free to use even without monitoring, I'm currently on my home monitoring trial with Ring, but will definitely sign up for the full year with no hesitation (1/3 of the cost I was paying). No issues integrating the First Alert Smoke and CO detectors (Simplisafe can only use their products). Also if you have ring cameras the recordings for that are included in the $10/mo or $100/yr
At 4.5 by 1.8 by 0.8 inches (HWD), the Ring Pro is slimmer and looks more like a traditional doorbell than the August Doorbell Cam Pro, the RemoBell, and the original Ring. It comes with four interchangeable faceplates (black, bronze, nickel, and white) to match the exterior of your home, a screwdriver, mounting screws and anchors, a Pro Power Kit for connecting to an existing chime box in case your existing doorbell wiring does not provide enough power, extension wires, and illustrated instructions. Ring also sells a battery-powered model, the Video Doorbell 2.
For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).
On the plus side, the new Chime accessory mitigates some of Ring’s app friction. Even if your phone is in another room, or if you’ve turned its volume down, you can still hear that someone’s pressed your doorbell button. From there you can just go straight to your front door, and talk to your visitor in person. Just like they did in I Love Lucy and The Dick Van Dyke Show.
Ring says the battery should last anywhere from six to 12 months between charges, depending on how much activity your doorbell receives. Those claims might be a bit inflated, though. In my experience, the battery drained to under 40 percent in about six weeks of use, which means I’ll be recharging it every three months. For my testing, I had all the features enabled, such as motion detection and quick live view access. Ring says disabling these features will extend the battery life.
Ring lacks third-party integrations. The Base Station communicates with Z-Wave and Zigbee, and I’ve confirmed those protocols were added for a reason, but they haven’t taken advantage of them. The system supports the First Alert Z-Wave Smoke/CO detector which is also compatible with the Ring Response service. Soon, it will also work with the Dome Siren. But that’s it. Ring currently lacks an IFTTT channel and even an Alexa integration, which is odd as Ring is owned by Amazon.
Right now, abode reigns supreme due to the number of integrations they offer, the variety of security sensors, and the fact that it’s an open platform not tied to Google (Nest) or Amazon (Ring). I would give Ring second place due to cost, and it’s bumped iSmart off of my list of recommended self-monitored security systems. My only gripe is that it doesn’t integrate well with its own camera system. Nest takes third, but I would still recommend it. It’s a beautiful system, easy to use, and thoughtfully designed. That said, if Ring raised the bar on their camera integrations, launches an indoor camera, a flood sensor (coming soon), and a glass break sensor, it might just become the system to beat.
There are many great brands out there that make it easy for you to find the security products that fit your unique needs. Two such options are the Ring and Nest systems. These popular brands have developed a range of products to help you easily build and customize your home security ecosystem. In order to help you choose the right system for you, we’ve broken down the pros and cons of each. Here’s a quick rundown of the main features you should keep in mind when deciding between the two:
Unfortunately, there’s no video-on-demand (VOD) feature that lets you view the outside world whenever you want. Instead, you have to wait for someone to approach the door. VOD appears to be on many users’ wish lists, and Ring says it’s working on adding that feature. With VOD built-in, the doorbell would instantaneously turn into a full-featured security camera, so let’s hope we see this addition soon.
When you press the doorbell button a chime sounds, the camera begins recording, and a push alert is sent to your phone. As with the Ring Floodlight Cam, you have to subscribe to a service plan to view, share, and download recorded video. The Protect Basic Plan is $3 per month or $30 per year and gives you 60 days of cloud storage per camera and full access to all of your videos. For $10 per month or $100 per year, the Protect Plus Plan gives you everything from the Basic Plan for an unlimited number of cameras, and you get a lifetime warranty (the warranty period is normally one year). By way of comparison, the August Doorbell Cam Pro subscription costs $4.99 per month or $49.99 per year for access to 30 days worth of video.
There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.
Watch over your home from your phone, tablet or PC with the all-new Ring Video Doorbell 2. The latest version of Ring’s iconic Video Doorbell features an innovative design packed with advanced security features. With 1080HD video, two interchangeable faceplates and a quick-release rechargeable battery pack, the new Ring Video Doorbell 2 makes monitoring your home even easier than before. Get instant alerts when people press your Doorbell or trigger the built-in motion sensors, and see, hear and speak to visitors from your phone, tablet or PC.